Superwave Laser Technology Co.,Ltd
Call us:+86-139 2523 7065
E-mail:info@superwavelaser.com
Products
Hot Products
News
Home > News > Content

The Advantage Of 3D Fiber Laser Marking And Engraving Machine

Superwave Laser Technology Co.,Ltd | Updated: Jun 08, 2018


The emergence of three-dimensional laser marking machine is a major jump in the field of laser marking, it is no longer limited to the surface shape of the object in the class plane, can be extended to the three-dimensional surface, to achieve high-efficiency three-dimensional surface laser Marking and surface microstructure manufacturing. Compared with the traditional two-dimensional laser marking machine, three-dimensional laser marking machine has the following advantages:

 

1. Greater range and finer light efficiency.

3D marking using pre-focused optical mode, the use of larger X, Y-axis deflection lens, which can allow the transmission of more larger laser spot light  , better focusing accuracy, better energy ; if 3D marking and 2D marking work together in the same focus precision , the marking range of 3D can be greater.


2.can engraving different height of the object, variable focal length.

 As the 3D marking can quickly change the laser focal length and laser beam position, greatly improving the processing efficiency,but the 2D marking can not achieve this effect. Moreover, in real life, many parts of the surface shape is not regular and some parts of the surface height difference is quite large, for 2D marking processing is really powerless, this time, the advantages of 3D marking will become more obvious.

 

3. suitable for deep engraving.

 For the traditional deep engraving method is the electric way in the engraving process at regular intervals to move the lift to a certain height ,to ensure that the laser surface is well focused.3D marking for deep processing, there is no such problem, both to ensure the effect, but also enhance the efficiency, while eliminating the cost of electric lift.



 Application


It's suitable for all kinds of metals and nonmetals laser marking on 3D surface. It's widely used in mobile manufacture, cubic circuits, medical equipments, moulds, 3C electronics, auto parts, electronic communication, etc.

 

Samples



3d laser sample.jpg


3d laser sample.png



Date sheet


Laser typeSW-FLM30

SW-FLM50

SW-FLM100

SW-FLM150

Laser power30W

50W

100W

150W

Laser wavelength1064nm

Marking area

200*200mm(300mm×300mm400x400mm,500x500mm,600x600mm optional)

Marking height difference

≤120mm(Allowing marking height difference of different planes)
Marking speed≤7000mm/s

Rated power

≤800W

≤1000W

≤1000W

≤1300W

Power supply

AC220V±10%/50hz

Cooling systemAir coolingAir coolingAir cooling

Air cooling or Water cooling




Related Products