Superwave Laser Technology Co.,Ltd
Call us:+86-139 2523 7065
E-mail:info@superwavelaser.com
Products
[[TD-Hot Products]]
Exhibition
Home > Exhibition > Content

Simple contrast between infrared laser and ultraviolet laser-superwave laser machine

Superwave Laser Technology Co.,Ltd | Updated: Dec 21, 2017


Infrared YAG laser (wavelength 1. 06 mu m is the most widely used laser source for material handling. However, many plastics and some special polymers, such as polyimide, which are used in the substrate materials of flexible circuit boards, can not be processed through infrared processing or "hot" processing. Because "hot", make plastic deformation on the edge of the cutting or drilling of coking in the form of damages, may lead to the weakening of the structural and parasitic conductive pathways, and had to add some subsequent processing to improve processing quality. Therefore, infrared laser is not suitable for certain flexible circuits. In addition, even in high energy density, copper cannot absorb the wavelength of infrared laser, which makes it more difficult to limit its use.


However, the output wavelength of ultraviolet laser generally under 0.4 mu m, this is one of the main advantage of the processing of polymer materials, unlike infrared processing, ultraviolet microprocessor in essence is not heat treatment, and most of the materials are more likely than absorb infrared light to absorb uv light. High-energy ultraviolet photons directly destroy many molecular bonds on the surface of the nonmetallic material, use the "cold" light corrosion treatment technology of machining of parts with smooth edges and a minimum of coking. Moreover, the characteristics of ultraviolet short-wave length itself have advantages for mechanical microtreatment of metals and polymers. It can be focused on the point of submicron orders of magnitude, so can make small parts processing, even in the low level of the pulse energy, also can get very high energy density, effective material machining micro holes is a widely application in the industry, the main form in one of two ways:


One is to use infrared laser: to heat the material on the surface of the material and vaporize it (vaporize) to remove the material, which is often called thermal processing. Mainly use YAG laser (wavelength 1.06 mu m).


2 it is to use ultraviolet laser: high-energy ultraviolet photons directly destroy many molecular bonds on the surface of the non-metallic materials, molecules out of the object, this way will not produce the high quantity of heat, so called cold work, mainly adopts ultraviolet laser wavelength (355 nm).


  • Company Profile
    Superwave Laser Technology Co.,Ltd is a professional China eyeglasses manufacturer, with professional factory we are always able to offer you discount eyeglasses, welding jigs and fixtures, stainless steel laser cutter, battery spot welding machine, leather laser engraving machine with reliable quality....
  • Product Category
  • Contact Us
    Address:Liantang Industrial Park, #48Kangzheng Road, Buji Town, Shenzhen, China
    Tel: +86-139 2523 7065
    Fax: 0086 755 8240 4717