Superwave Laser Technology Co.,Ltd
Call us:+86-139 2523 7065
E-mail:info@superwavelaser.com
Products
[[TD-Hot Products]]
Exhibition
Home > Exhibition > Content

Protection of laser engraving machine

Superwave Laser Technology Co.,Ltd | Updated: Jun 01, 2018


Laser engraving machine is widely used, and the cutting and carving speed are very fast. Therefore, laser engraving machine has become the most widely used carving machine equipment in the industry. However, as a laser device, it will do some radiation harm to the human body when it is used. In particular, the laser arc and flame during cutting will do great harm to the eyes of the operator. So, how to protect the eyes and prevent radiation in daily production and use?


Protective equipment of laser cutting machine is a typical laser protective goggles, due to avoid the laser protective goggles to the human eye injury, according to its principle of protection can be divided into reflection, absorption, diffraction and combined several, of course, they will be on the basis of laser cutting machine laser radiation wave productive line filter protection, in order to maintain in the body of laser cutting machine laser, which is on the market is relatively safe lunch protective equipment of laser cutting machine. This type of protection can also be used for plasma arc of plasma cutting machine.


1. According to the national or local regulations, wear a protective layer of dark eyes or goggles, or welding working cap, to maintain the eyes from the flame for its light, ultraviolet and infrared light damage of plasma arc.
2. Pay attention to diet adjustment and strengthen the anti-radiation ability
If the human body has enough health level, a little radiation about the laser cutting machine is able to resist. Because these foods can help people maintain their eyes well, so that the human body can better protect the human body under the radiation of laser cutting machine.
3. When setting up the cutting site, the following measures can be taken to reduce the reflection or radiation of ultraviolet rays: paint the wall of the working site into a dark color to reduce radiation; Install protective screen or vertical curtain to reduce ultraviolet radiation.
4. Please change the lenses of eyes, goggles or working caps as soon as they are concave.
5. Other personnel in the work area should not look directly at the arc or flame of cutting.
The above are some laser engraving machine operator commonly used in protective measures, from all aspects to do a good job of the most basic protection and security, not only can better operating equipment, may also be better to do a good job of personal protective safety.